- Brand : ATEN
- Product name : PN0108
- Product code : DCP2940
- Category : Power Distribution Units (PDUs)
- Data-sheet quality : created/standardized by Icecat
- Product views : 127624
- Info modified on : 10 Aug 2024 09:48:13
- standard (0.6 MB)
-
Long product name ATEN PN0108 power distribution unit (PDU) 8 AC outlet(s) 1U Black
:
8-Port 1U Power Distribution Unit (PDU), Switched (8 x C13)
-
ATEN PN0108 power distribution unit (PDU) 8 AC outlet(s) 1U Black
:
Features
- Remote power on / off / reboot control for eight outlets via TCP/IP and a built in RS-232 PON (Power Over the NET™) port
- Local power on / off / reboot control via the PN0108's PON port to the computer's RS-232 port
- Daisy chain up to 15 additional stations to control up to 128 outlets
- Manual switching between Local and Remote access for each port via front panel push button switches
- Individual control of each port - users can set the power on sequence and delay time for each port to allow equipment to be turned on in the proper order
- Easy setup and operation via a GUI interface
- Provides three configuration/management methods: Browser; Telnet; or Console Terminal
- Safe shutdown and rebooting for Windows systems*
- Overcurrent protection and recovery for each AC port (110 V model only); total port overcurrent protection (both models) - remote users can monitor the outlet status via the GUI interface
- Separate circuits for the unit's power and the power to the devices - the power control status menu is still accessible even when an overcurrent condition trips the devices' circuit breaker
- On/Off scheduling - allows everything from a one-time start/shutdown, to daily, weekly, etc. starts/shutdowns at user-specified times
- Port grouping - perform the same action on a specified group of ports
- LEDs for easy status monitoring
- Two level (Administrator and User) security
- Configuration can be reset
- Firmware upgradeable - daisy chained stations receive the upgrade via the daisy chain bus
- UL/TUV approved
- Multiplatform support: Windows 2000/XP/Vista, Linux, Unix and FreeBSD.
*Safe shutdown and rebooting is supported if the Power Monitor utility has been installed
*The PN0108 is not a stand-alone unit. It must be connected to the CN6000, PN9108, SN0108 or SN0116 to access these features
Package Contents
- 1x 8-Port Power Over the NET™
- 1x 1ADP-0005-001G AC Source Power Cord
- 8x Power Outlet Power Cords
- 8x Safe Shutdown Cables
- 1x PON Cable (DB9 F to DB9 M)
- 1x User Instructions
- 1x Mounting Kit :Rack mounting brackets and hardware
- 4x foot pads
- 1x Software CD -
Short summary description ATEN PN0108 power distribution unit (PDU) 8 AC outlet(s) 1U Black
:
ATEN PN0108, Basic, 1U, Metal, Black, 8 AC outlet(s), C13 coupler
-
Long summary description ATEN PN0108 power distribution unit (PDU) 8 AC outlet(s) 1U Black
:
ATEN PN0108. PDU types: Basic, Rack capacity: 1U, Housing material: Metal. AC outlets quantity: 8 AC outlet(s), AC outlet types: C13 coupler, Power plug: C14 coupler. Nominal input voltage: 100-240 V, Maximum current: 12 A, AC input frequency: 50 - 60 Hz. Dimensions (WxDxH): 432.4 x 209.8 x 44 mm, Weight: 3.7 kg
Design | |
---|---|
PDU types | Basic |
Rack capacity | 1U |
Housing material | Metal |
Product color | Black |
Ports & interfaces | |
---|---|
AC outlets quantity | 8 AC outlet(s) |
Power plug | C14 coupler |
AC outlet types | C13 coupler |
Serial ports quantity | 2 |
Features | |
---|---|
LED indicators |
Power | |
---|---|
Nominal input voltage | 100-240 V |
Power | |
---|---|
AC input frequency | 50 - 60 Hz |
Maximum current | 12 A |
Nominal output voltage | 100-240 V |
Weight & dimensions | |
---|---|
Dimensions (WxDxH) | 432.4 x 209.8 x 44 mm |
Weight | 3.7 kg |
Operational conditions | |
---|---|
Operating temperature (T-T) | 0 - 40 °C |
Storage temperature (T-T) | -20 - 60 °C |
Operating relative humidity (H-H) | 0 - 80% |
Technical details | |
---|---|
Compliance certificates | RoHS |